Home About Us Products Exports Electrocoat Feedback Contact Us

Products

 
Polishing Equipments
Cleaning Systems
Tanks
Electroplating Barrels
Filter Units
Air Agitation Units
Rectifiers
Dryer Units
Electrophoretic Lacquer Coating Plant
Laboratory Equipments & Instruments
Titanium Products
Accessories
Polishing Consumables
CED Coating Plants & Processes
Heat Transfer Wood Finishes
Water Transfer Printing
 
LABORATORY EQUIPMENTS & INSTRUMENTS
HULL CELL APPARATUS

Hull-Cell provides a simple and rapid method of visually testing the quality of Electroplated deposits and of determining the effects of different variables over a wide current density range, temperature, bath composition, addition to the Plating solution or of purification treatment etc.,
The Apparatus consists of:
1) Perspex Chamber of 267 ml. Capacity.
2) Air Agitation pipe with Air Bubbler.
3) Built - in heater with Thermostat Controls.
4) DC supply by Lab Rectifier.
5) Polished M.S./ Brass Test Panels.
6) Anode pieces of Electrolyte.
7) Timer 0/60 Minutes (Manual)- (Optional).

Optional:
a) Special Hull Cell made of acrylic of 1000 cc. Or 267 ml. without Heater.
b) PVC Hull cell use with Chrome Solutions.
c) Solid State rectifiers of 8V/5 Amps, 8V/10 Amps, and 12V/10 Amps, ripple free, twin range, two channel outputs etc.,

   
SALT SPRAY APPARATUS

In the Salt Spray Apparatus Chamber articles are exposed to a mist of salt saturated air produced by spraying common salt solution into a closed cabinet. The articles are positioned so that they are exposed to the mist produced.

The Apparatus consists of:
1)An acrylic mist chambers that’s non-corroding.
2)A compressor for compressed air supply to chamber.
3)Atomizing nozzles for mist formation.
4)A specimen supporter.
5)Heater with temperature controller. (optional)

 
Standard size:
a) 885 (L) x 510(B) x 310 (H)
b) 450 (L) x 250 (B) x 220 (H) mm.

Models where main Chamber is made from PVC/PP are also available.

To conform with ASTM B 117, models where the Salt Solution container is outside of Spray Chamber are also available.
SULPHATE ESTIMATION KIT FOR CHROME

The presence of an acid radical such as sulphates in a Chromium Solution is a basic requirement, which makes deposition of Chromium possible. Sulphates act only as a Catalyst and are not consumed in the reaction. However, a loss is encountered due to drag out of solution, and throwing power is critically affected.

The Sulphate estimation kit provides the quickest and simplest method for estimation and control of Sulphates with accurate results. The kit is easy to operate. Directions are easy to follow. Solutions are clearly indicated. The Kit, as illustrated, is complete with:

Electric Centrifuge with 4 places 50-ml. Head and metal shields.
4 glass centrifuge tubes, graduated in oz/gal.
2 pipette each of 5 ml. and 20ml. Capacity with pipette bulb.
1 bottle each of solution “A’ & B’ 500 ml.
Cleaning wire and test tube brush.
 
DIGITAL pH METER

Digital pH Meter is a simple direct Indication Instrument, which measures pH. pH is an important measurement in Electroplating

We offer:
Laboratory pH Meter:-
This is Table Top model with pH Electrode, Stand etc and 3.1/2” Digit Display. Resolution is 0.01.

Portable pH Meter:-
This is a pocket model with 0.1 Resolution and lower accuracy, but with convenient handling as it has built in electrode. Measurement is possible in process itself.

 

DIGITAL AMPERE HOUR METER

Digital type Ampere-hour meter is for electroplating battery forming, battery charging, chemical industries, R& D Laboratories. The main advantages are
a)Efficiency of plating batch can be computed.
b)Savings in expensive electrolyte, anode and energy.
c)Exact control of plating thickness
d)Improved and consistent quality of plating
e)Simplification of job-work costing.
f)Very quick payback.

The Unit has facility to select either AMPERE-HOUR or AMPERE-MINUTE mode of operation, which enables user to obtain high resolution in low current applications. Input 230 V AC 6 Watts, 4 to 6 digit LED display.

Available with or without PRESET programming facility through 4 to 6 digit thumb-wheel on front panel. Audio or Visual alarm can also be provided.

Accuracy: Better than 1% Battery Back Up: Single 9V dry cell for storing count in the event of power failure.

OPTIONAL FEATURE: Totalising facility with two displays, one for job count another for total count can also be provided.

   
THICKNESS MEASURING INSTRUMENT(DESTRUCTIVE TYPE)


It is a versatile and sophisticated instrument for the measurement of coating of metal or alloy by electroplating or other method. It works on coulometric principle. It can measure thickness on flat or curved surface. It determines thickness of coating on metallic (magnetic) or non-magnetic base.
Measurement : 0 to 99.9 microns.
Accuracy : ± 2%
Readability : 0.1 Microns
Minimum Measuring Area : 3mm X 3mm Flat Surface.

APPLICATION
Coating : On Base Metal
Cadmium : Alu., Brass, Copper, Nickel, Steel.
Chromium : Alu., Brass, Copper, Cadmium, Nickel.
Copper : Alu., Steel, Nickel , Non Metals.
Gold : Brass, Copper, Nickel.
Lead : Alu., Brass, Chromium, Copper, Silver, Steel.
Nickel : Alu., Brass, Chromium, Copper, Silver, Steel.
Silver : Alu., Brass, Copper, Nickel, Tin, Steel.
Tin : Brass, Copper, Nickel, Steel.
Zinc : Brass, Copper, Nickel, Steel.
 
NON-DESTRUCTIVE PLATING THICKNESS MEASUREMENT
ELECTROMAGNETIC TYPE
Non-destructive measurement of thickness of non-magnetic coatings on Magnetic Base:
Range
:
0 to 100 & 1000 Microns
Accuracy
:
± 5%
Readability
:
0.1 Microns
Min Measuring
:
4mm Flat Surface
Area    
Application
:
Non – Magnetic Coating on Magnetic base;
 
Paint, Teflon, Insulating coating, Powder Coating, Zinc, Cadmium, Tin on Steel, Non Magnetic foil thickness.
Powder
:
230 / 110 V; , 50, 60 Hz
Size
:
21 x 28 x 9.5 cm
 
EDDY CURRENT INDIRECT
Range
:
0 to 30 Microns
Accuracy
:
± 5%
Readability
:
0.1 Microns
Min Measuring Area
:
6mm Flat Surface
Application
:
Higher Conductivity coating On lower conductivity base Nickel Zinc,
    Cadmium & Tin on steel.
 

© 2006 E-Mech Enterprises  (India) Pvt. Ltd.  All rights reserved. Powered by : Siddhi Enterprise