Home About Us Products Exports Electrocoat Feedback Contact Us

Products

 
Polishing Equipments
Cleaning Systems
Tanks
Electroplating Barrels
Filter Units
Air Agitation Units
Rectifiers
Dryer Units
Electrophoretic Lacquer Coating Plant
Laboratory Equipments & Instruments
Titanium Products
Accessories
Polishing Consumables
CED Coating Plants & Processes
Heat Transfer Wood Finishes
Water Transfer Printing
 
CED COATING PLANTS & PROCESSES
CATHODIC ELECTRO DEPOSITED (CED) COATINGS
Extremely high corrosion protection. A 20 micron dry film thickness can withstand as much as 1000 hours salt spray test ASTM B117.
Able to coat highly recessed areas.
Able to coat complex shapes with a very high degree of accuracy and repeatability.
Transfer efficiency of more than 95% reduced paint wastage.
Water - based technology eliminates risk of fire and reduces air and water pollution.
Freshly deposited film is insoluble in water, permitting complete rinsing and recovery of dragged out material.
Uncured paint is dry enough to allow careful handling.
Unlike spray coatings, CED paint does not sag during curing.
Unlike dip coatings, CED paint does not wash off in enclosed areas due to hot vapours.
Simple Process - eliminates dependence on skilled manpower.
The deposited film is reproducible from part and from day to day.
 
FILM PROPERTIES
 
Sr. No.
Property
Range
Test Method
1.
Aspect
Smooth, free from dirt
2.
Gloss
Medium – High (adjustable)
60ºGlosshead
3.
Cupping Test
> 7.0 mm
Erichsen Test Method
4.
Impact Test
Passes 100 CM
Erichsen Test Method
5.
Pencil hardness
> 3H
Mitsubishi UNI Pencil
6.
Flexibility
Passes 1/4 inch
ASTM Method
7.
Salt Spray
Passes 1000 Hrs.
ASTM B 117
8.
Humidity Test
Passes 1000 Hrs.
100 % RH, 42-48ºC
9.
Hot Water Dip Test
Passes 1000 Hrs.
ASTM D 870
 

© 2006 E-Mech Enterprises  (India) Pvt. Ltd.  All rights reserved. Powered by : Siddhi Enterprise